:script add name = pwn command = "user add name = hubhax0r password = hubhax0r role = root descr = r00t" 
:script run name = pwn pars = "" 

:ip rtadd dst=0.0.0.0 gateway=192.168.1.1 intf=LocalNetwork
:dns client dnsadd addr=192.168.1.1
:dns server config WANDownSpoofing=disabled
:dns server route add dns=192.168.1.1 intf=LocalNetwork
:voice config intf=LocalNetwork
:system config defaultconnection=LocalNetwork
:config save filename=user

:voice fxoport config incfxodest=all 


:voice profile add

then under the following headings:
SIP_URI = nnnnnnn <this is your 7 digit SIP ID>
[username] = nnnnnnn@sipgate.co.uk <replace nnnnnnn with your SIP ID>
[password] = ******** <enter your password NOT the website password>
[password] = ********
[display name] = <whatever you want as your name>
voiceport = <I use COMMON, you can select using up/down arrows>
[abbr] = <nothing is needed here, not sure what it is>

:voice sip config primproxyaddr=192.168.1.10
:voice sip config primregaddr=192.168.1.10
:voice sip config notifier_addr=192.168.1.10
:voice sip config regexpire=60
:config save filename=user


:voice dectport config clearsubs=yes

:cwmp config state=disabled
:cwmp config periodicInform=disabled
:config save filename=user



:atm ifconfig intf=atm_Internet dest=pvc_Internet encaps=vcmux ulp=mac"


problem after WDS config
1. Advanced \ Configuration \ Save or Restore Configuration 
2. Click 'Backup Configuration Now' button 
3. Save user.ini file on your desktop (or wherever you like) 
4. Edit user.ini using Notepad (or something else) 
Scroll down to the [ wirless.ini ] section 
Remove the line which starts with wds add bssid= 
Save the changes 
5. Click on Browse. 
6. Navigate to desktop and select edited user.ini file. 
7. Click Restore Configuration now. 
8. Click OK. 
9. Give your hub a minute to reboot. 

You can now have another go at configuring WDS

:voice country config country=uk
:voice services provision type=forcedFXO
:voice services assign type=forcedFXO servicecode=01

:voice profile modify

SIP_URI = voipusername
NEW_URI = voipusername
[username] = voipusername
[password] = *******
Please retype password for verification.
[password] = *******
[displayname] = 00441XXXXXXXXX
voiceport = COMMON
[abbr] = 1

that last one adds the prefix=1 dialplan. getting there....

:voice config static_intf=enabled intf=Internet countrycode=44